Gränges will invest $52 million to expand its recycling and casting operations in Huntingdon, Tennessee, enabling its market launch of near-zero carbon aluminum solutions in 2024 aimed at meeting growing demand for sustainable products in North America. The new center will be powered via renewable electricity as part of the Tennessee Valley Authority (TVA) Green Invest program.
AFS Corporate Member Kimura Foundry America, Inc. (Shelbyville, Indiana) will install a new ExOne S-Max 3D sand printer this quarter to increase capacity and meet diverse market demands for high quality castings with quick turnaround times. It becomes the fourth sand mold and core printer for the foundry’s U.S. location; the company also operates six at its headquarters in Japan.
The Swedish premium car brand Volvo Cars has purchased two Carat 840 die-casting cells for its factory in Torslanda, Sweden. The Carat 840, along with Carat 920, Bühler’s largest die-casting solutions, were launched in 2021.
In October 2021, Bühler launched the Carat 840 and the Carat 920 with locking forces of up to 92,000 kilonewtons (kN). With these machines, Volvo can produce structural castings for automotive body in white assemblies, known as megacastings.
AFS Corporate Member Grede Holdings LLC was honored in April with AGCO’s 2021 Sustainability Award for its continuous efforts to practice and improve environmental and social sustainability.
“Grede’s strategic energy management system enhances their financial position with money-saving energy management processes, reduces the company’s overall carbon footprint and energy usage, and instills a culture of energy efficient practices in all Grede foundries and facilities,” an AGCO press release stated.
Ancient Celtic history was brought into the present at AFS’s 2022 CastExpo in Columbus, Ohio, during the Steel Founders Society of America (SFSA) annual Cast in Steel competition––this year’s challenge: to use modern casting tools and technologies to creatively design and produce a functioning version of a Celtic Leaf Sword. Following a day of rigorous testing by judges on April 22––performed in front of a large audience––University of Wisconsin-Platteville’s Pioneers team emerged as the Grand Prize Winner and was honored at a ceremony on April 24.
Sure Cast Foundry Inc., an AFS Corporate Member in Blaine, Minnesota, has relocated into its newly constructed 19,000-s.f.-facility across the street from its former plant. The additional 5,000 s.f. provides storage and office space not previously available to staff and includes a conference room for hosting customers. Designed with the future in mind, the new facility is ready for further expansion of 10,000 s.f. off a rear wall––the foundry’s goal is to vertically integrate with its own machine shop in the near term.
General Motors is planning a $51 million upgrade at its aluminum die casting foundry in southern Indiana to support manufacturing of the upcoming electric Chevrolet Silverado pickup.
GM said it will install state-of-the-art equipment at its sprawling Bedford plant, which this year began producing electric drive unit castings for the 2022 GMC Hummer EV Pickup and 2024 GMC Hummer EV SUV, The Herald-Times reported.
Production of the 2022 GMC Hummer EV Pickup will begin in December at GM’s Factory ZERO assembly plant, located in Detroit and Hamtramck, Michigan,
AFS Corporate Member Benton Foundry, Benton, Pennsylvania, was awarded a $3 million grant through the Redevelopment Assistance Capital Program (RACP), according to Senator John R. Gordner (R-27) and Representative David Millard (R-109).
The company’s footprint will expand by 70,000 sq.ft. and new robotic equipment will be installed. This will result in at least 50 new jobs and an increase of daily production to 200 tons, an increase of 50 tons per day.
Industrial Opportunity Partners has sold AFS Corporate Member Aarrowcast Inc. to Charter Manufacturing, a producer of carbon-steel bar, rod, and wire products headquartered in Mequon, Wisconsin. Terms of the sale were not disclosed.
The Lawton Standard Co. recently added the facilities and employees of QESC (Quality Electric Steel Castings, Houston, Texas) to its growing casting business. The new site will operate as a sister operation to The C.A. Lawton Co., De Pere, Wisconsin; The C.A. Lawton Co., Minster, Ohio; Temperform, LLC, Novi, Michigan; and Penn-Mar Castings, LLC, Hanover, Pennsylvania. Each company will access the other’s products and benefit from adopting best practices across the family.